neqto: Bridge Chip

neqto: Bridge

Cutting-Edge IoT for Any scale

See All neqto: Bridge Products

By using the neqto: Bridge series of IoT modules, you can develop an unlimited number of next-generation IoT products that are small, low cost, fast, and energy efficient. Explore the new world of embedded IoT systems with features such as multi-interface for industrial machines, mobile battery power, and small communication modules with autonomous functions.

Conveniently Sized IoT

At just 51mm x 40mm (LTE Module) and 45mm x 40mm (Wi-Fi Module), the Bridge is the smallest IoT device in the neqto: portfolio. This system on module is ready to be quickly packaged with mass-produced products, enabling every type of edge device, from manufacturing equipment to robotics, to implement and gain from IoT.

Rapid Computing Power

neqto: Bridge can rapidly perform operations on machine and sensor data, as well as use advanced IoT technology for calibration. Communicate IoT data in real time between the edge and the cloud, bidirectionally.

Power Efficient Technology

neqto: Bridge has the ability to optimize power usage of the machines and equipment it is integrated with. Our autonomous algorithms can be implemented with various devices so that even if connections are temporarily disconnected, the Bridge will still take in data and operate without sending to the cloud.

neqto: Bridge LTE

An Embedded IoT Module for Anywhere and Anything.

View Module Specifications

IoT in Your Hands

Get your hands on real hardware to gain a deeper understanding of IoT.

View Developer Kit

neqto: Bridge Products

neqto: Bridge LTE

Outline

The neqto: Bridge developer kit is a small, fast computer with a wide range of connection types, including UART, I2C, SPI and GPIO, that can be used to evaluate performance and verify feasibility. The communication network options vary by model, including LTE, cellular LPWA, or Wi-Fi, and a variety of features can be driven by a power consumption of only 1 watt (1.25W for LTE module).

The neqto: developer kit is ideal for software development and prototyping.

Specifications

neqto: Bridge module
+ I/O Board
neqto: Bridge module
+ Digital I/O Board
Device Name STM32L4R5 STM32L4R5
Processor ARM Cortex-M4 ARM Cortex-M4
Digital I/O Voltage 3.3V / 5V (※1) 3.3V / 5V (※2,※3)
CPU Speed 80MHz 80MHz
Analog I/O Number 1 1
Digital I/O Number 2 2
ROM 2MB 2MB
RAM 640KB 640KB
Flash 16MB 16MB
USB 1 (※4) 1 (※4)
I2C 3 (※5) 4 (※6)
SPI 0 0
UART 1 1
Photo Coupler 1 1
MOS Relay 1 1
Reset SW 1 1
User SW 1 1
SYSTEM_LED Blue x 1, Red x 1 Blue x 1, Red x 1
Wired LAN 0 1 (※7)
Size 66.5 mm x 72.5 mm x 17.2 mm 66.5 mm x 72.5 mm x 16.5 mm
Device Name STM32L4R5
Processor ARM Cortex-M4
Digital I/O Voltage 3.3V / 5V (※1)
CPU Speed 80MHz
Analog I/O Number 1
Digital I/O Number 2
ROM 2MB
RAM 640KB
Flash 16MB
USB 1 (※4)
I2C 3 (※5)
SPI 0
UART 1
Photo Coupler 1
MOS Relay 1
Reset SW 1
User SW 1
SYSTEM_LED Blue x 1, Red x 1
Wired LAN 0
Size 66.5 mm x 72.5 mm x 17.2 mm
Device Name STM32L4R5
Processor ARM Cortex-M4
Digital I/O Voltage 3.3V / 5V (※2,※3)
CPU Speed 80MHz
Analog I/O Number 1
Digital I/O Number 2
ROM 2MB
RAM 640KB
Flash 16MB
USB 1 (※4)
I2C 4 (※6)
SPI 0
UART 1
Photo Coupler 1
MOS Relay 1
Reset SW 1
User SW 1
SYSTEM_LED Blue x 1, Red x 1
Wired LAN 1 (※7)
Size 66.5 mm x 72.5 mm x 16.5 mm
  1. Only "I2C for Long cable" is available for 5V
  2. Only 3.3V is available for I2C for Module
  3. Only 5V is available for I2C for Long cable
  4. This connector is used to supply power to the IO Board and Digital IO Board.
    It is also used as an interface to connect to a PC when performing the initial configuration of the module.
  5. I2C for Module x 1, I2C for Long cable x 1, I2C for Short cable x 1
  6. I2C for Module x 1, I2C for Long cable x 2, I2C for Short cable x 1
  7. Supported by connecting an Ethernet module (model number: WIZ850io)

Outline

From manufacturing and shipping to communications industries, IoT modules equipped with neqto: Engine add value to services and businesses that require a high level of performance in various operations. These small neqto: Engine embedded IoT modules bring performance and power optimization to top levels, all while performing and utilizing advanced edge computing, device management, and machine learning rule engines to optimize embedded systems.

Specifications

Specifications

neqto: Bridge LTE neqto: Bridge LTE-M neqto: Bridge Wi-fi
neqto: Bridge LTE neqto: Bridge LTE-M neqto: Bridge Wi-Fi
Device Name STM32L4R5 STM32L4R5 STM32L4R5
Processor ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4
Digital I/O Voltage 3.3V / 5V Tolerant 3.3V / 5V Tolerant 3.3V / 5V Tolerant
CPU Speed 80MHz 80MHz 80MHz
Analog I/O Number 2 2 2
Digital I/O Number 13 13 13
ROM 2MB 2MB 2MB
RAM 640KB 640KB 640KB
Flash 16MB 16MB 16MB
USB 0 0 0
I2C 2 2 2
SPI 2 2 2
UART 2 2 2
Photo Coupler 1 1 1
Photo MOS Relay 1 1 1
Extension Board I/O Board / Digital I/O Board I/O Board / Digital I/O Board I/O Board / Digital I/O Board
Size (㎜) 51 mm x 40 mm 51 mm x 40 mm 45 mm x 40 mm

neqto: Bridge

Device Name STM32L4R5
Processor ARM Cortex-M4
Digital I/O Voltage 3.3V / 5V Tolerant
CPU Speed 80MHz
Analog I/O Number 2
Digital I/O Number 13
ROM 2MB
RAM 640KB
Flash 16MB
USB 0
I2C 2
SPI 2
UART 2
Photo Coupler 1
Photo MOS Relay 1
Extension Board I/O Board / Digital I/O Board
Size (㎜) 51 mm x 40 mm
Device Name STM32L4R5
Processor ARM Cortex-M4
Digital I/O Voltage 3.3V / 5V Tolerant
CPU Speed 80MHz
Analog I/O Number 2
Digital I/O Number 13
ROM 2MB
RAM 640KB
Flash 16MB
USB 0
I2C 2
SPI 2
UART 2
Photo Coupler 1
Photo MOS Relay 1
Extension Board I/O Board / Digital I/O Board
Size (㎜) 51 mm x 40 mm
Device Name STM32L4R5
Processor ARM Cortex-M4
Digital I/O Voltage 3.3V / 5V Tolerant
CPU Speed 80MHz
Analog I/O Number 2
Digital I/O Number 13
ROM 2MB
RAM 640KB
Flash 16MB
USB 0
I2C 2
SPI 2
UART 2
Photo Coupler 1
Photo MOS Relay 1
Extension Board I/O Board / Digital I/O Board
Size (㎜) 45 mm x 40 mm